2kbp005m thru 2kbp10m, 3n253 thru 3n259 document number 88532 08-jul-05 vishay general semiconductor www.vishay.com 1 case style kbpm ~ ~ ~ ~ glass passivated single-phase bridge rectifier major ratings and characteristics i f(av) 2 a v rrm 50 v to 1000 v i fsm 60 a i r 5 a v f 1.1 v t j max. 150 c features ul recognition file number e54214 ideal for printed circuit board high surge current capability high case dielectric strength solder dip 260 c, 40 seconds typical applications general purpose use in ac-to-dc bridge full wave rec- tification for switching power supply, home appli- ances, office equipment, and telecommunication applications mechanical data case: kbpm epoxy meets ul-94v-0 flammability rating terminals: silver plated (e4 suffix) leads, solderable per j-std-002b and jesd22-b102d polarity: as marked on body maximum ratings ratings at 25 c ambient temper ature unless otherwise specified. parameter symbols 2kbp 005m 2kbp 01m 2kbp 02m 2kbp 04m 2kbp 06m 2kbp 08m 2kbp 10m units 3n253 3n254 3n255 3n256 3n257 3n258 3n259 maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v max. average forward output rectified current at t a = 55 c i f(av) 2.0 a peak forward surge current single half sine- wave superimposed on rated load i fsm 60 a rating for fusing (t < 8.3 ms) i 2 t 15 a 2 sec operating junction and storage temperature range t j , t stg - 55 to + 165 c
www.vishay.com 2 document number 88532 08-jul-05 2kbp005m thru 2kbp10m, 3n253 thru 3n259 vishay general semiconductor electrical characteristics ratings at 25 c ambient temper ature unless other wise specified. thermal characteristics ratings at 25 c ambient temper ature unless other wise specified. notes: (1) thermal resistance from junction to am bient and from junction to lead mounted on p. c.b. with, 0.47 x 0.47" (12 x12 mm) copp er pads. ratings and characteristics curves (t a = 25 c unless otherwise noted) parameter test condition symbols 2kbp 005m 2kbp 01m 2kbp 02m 2kbp 04m 2kbp 06m 2kbp 08m 2kbp 10m units 3n253 3n254 3n255 3n256 3n257 3n258 3n259 maximum instantaneous forward voltage drop per leg at 3.14 a v f 1.1 v maximum dc reverse current at rated dc blocking voltage per leg t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per leg at 4.0 v, 1 mhz c j 25 pf parameter symbols 2kbp 005m 2kbp 01m 2kbp 02m 2kbp 04m 2kbp 06m 2kbp 08m 2kbp 10m units 3n253 3n254 3n255 3n256 3n257 3n258 3n259 typical thermal resistance per leg (1) r ja r jl 30 11 c/w figure 1. derating curve output rectified current ambient temperature ( c) average forward output current (a) 20 40 60 80 100 120 140 160 170 0 0.5 1.0 1.5 2.0 capacitive load 5.0 10 20 = i (pk) i (av) 60 h z resistive or inductive load (per leg) p.c.b. mounted with 0.47 x 0.47" (12 x 12 mm) copper pads figure 2. maximum non-repetitive peak forward surge current per leg number of cycles at 60 h z peak forward surge current (a) 1 10 100 0 10 20 30 40 50 60 1.0 cycle t j = 150 c single sine-wave
2kbp005m thru 2kbp10m, 3n253 thru 3n259 document number 88532 08-jul-05 vishay general semiconductor www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical forward characteristics per leg figure 4. typical reverse leak age characteristics per leg instantaneous forward voltage (v) instantaneous forward current (a) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1 10 20 t j =25 c pulse width = 300 s 1% duty cycle percent of rated peak reverse voltage (%) instantaneous reverse current ( a) 0 20 40 60 80 100 0.01 0.1 1 10 100 t j = 100 c t j =25c t j = 125 c figure 5. typical junc tion capacitance per leg reverse voltage (v) junction capacitance (pf) 0.1 1 10 100 1 10 100 t j =25c f = 1.0 mh z vsig = 50mvp-p 0.125 x 45 o (3.2) 0.600 (15.24) 0.560 (14.22) 0.034 (0.86) 0.028 (0.76) 0.105 (2.67) 0.085 (2.16) 0.160 (4.1) 0.140 (3.6) 0.060 (1.52) polarity shown on front side of case: positive lead by beveled corner 0.460 (11.68) 0.50 (12.7) min. 0.420 (10.67) 0.500 (12.70) 0.460 (11.68) 60 (15.2) min. dia. 0.200 (5.08) 0.180 (4.57) case style kbpm
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
